![](images/pic21.jpg)
![](images/pic22.jpg)
![](images/pic23.jpg)
|
Specification
Bitumen Emulsion Slow Setting 2 (PBI CSS -2)
A slow setting emulsion used for plant or road mixes with graded and fine aggregates,
a substantial quantity of which passes a 2.36 mm IS sieve, and a portion of which
may pass a 75 micron IS sieve.
GRADE 5SS-2 is used for
- Plant or Road mixes like MSS, SDBC, SLURRY SEAL
- Prime Coat Application
Advantages:
- Penetrate the layer from cracks and crevices which consumes low temperature.
- This binds loose aggregates together strongly
- Cost effective pricing
- No pollution during road maintenance
- Prevents permeability of atmospheric air to the bottom layer
- Compatible with Portland cement
- Prevents raveling and rutting
- Water resistant and enhances easy drainage of water
- Highly adhesive
- Extended breaking
Type of surface |
Qty in kg / 10 m sq. |
Prime Coat |
6 to 9 |
Fog Seal /Crack seal |
5 to 10 |
Slurry seal |
10 to 12 |
Premix Coat |
10 to 12 |
Specifications :
Some important specifications and properties are :as per ( IS – 8887:2004) |
Binder- residue by evaporation |
Min 60% |
Stability to mixing with cement (% coagulation ) |
Max. 2 % |
Viscosity @ 25° C (Saybolt), sec |
30 - 150 |
Storage stability after 24 hours % max |
Less than 2% |
Miscibility with water |
No coagulation |
Penetration 25° C/ 100 g/ 5 secs |
60 -120 |
Details of packaging:
|